Georef PDF

Instructions

The map builder: layers, the page, export, and what is stored.

Map view, Page view and 3D view

The map builder has three views, chosen at the top of the page. Map view fills the window with the map and is for adding and checking layers. Page view shows the sheet of paper with the map in its frame and the title, legend, scale bar and north arrow round it. What Page view shows is what is exported. 3D view is for looking at the ground and the stems, and is described below.

The panel on the left has two tabs. Layers lists the layers and the base map. Page holds the template, the paper, the scale and the text on the sheet.

Layers

Add layer offers four sources. Files can also be dropped on the map.

A file from this computer
A zipped shapefile (or its .shp, .dbf and .prj chosen together), KML or KMZ, GPX, GeoJSON, or a CSV with latitude and longitude columns or a WKT column. A shapefile in a projected coordinate system is converted from its .prj file; a GeoJSON or CSV must be in longitude and latitude (WGS 84). A georeferenced PDF is placed on the map as a picture of its map frame. A GeoTIFF raster is re-projected from its own coordinate system and placed as a picture: one band is drawn with a colour ramp, three bands as colour. A large raster is read through its overviews, so it is best saved as a cloud-optimised GeoTIFF.
A layer stored on the site
Field data uploaded from the app, and files stored earlier.
Stem Mapper plots
Plots of the same account on Stem Mapper. Stems come in as points with number, species, diameter and height, labelled by number; a plot circle comes in as an area.
A web address
An ArcGIS feature layer that is shared with the public, given by the address of the layer (ending in /FeatureServer/ or /MapServer/ and the layer number), or map tiles with {z}, {x} and {y} in the address. The layer's own credit line is put on the page. A layer's owner sets the terms for its use.

The list runs from the top layer down. A new layer goes above the layers of its own kind: points over lines, lines over areas, areas over pictures. Up and Down change the order. The checkbox hides a layer without removing it, and Zoom to moves the map to it. A click on a feature on the map lists its attributes.

Style

Style opens the layer's colour, point size, line width, fill and label. Sizes are in points on paper, so a line set to 1.5 pt is 1.5 pt wide on the exported sheet at any scale. The label is taken from one attribute of the layer. A feature that carries a colour of its own, such as a placemark coloured in the app, keeps it.

A raster of one band has its colours and the lowest and highest values drawn; values outside them take the end colours. It starts at the 2nd and 98th percentiles of the raster, and the legend gives the two values. A click on the raster, away from any feature, gives the value at that point.

Base map

The base map is one of aerial photographs, the USGS topographic map, photographs with topographic lines, hillshade, slope, or none. Contours at 10 ft and streams can be laid over it; the contours are drawn at 1:25,000 and closer. These layers come from United States Geological Survey services, cover the United States, and are in the public domain. Their credits are printed on the page.

The page

A template sets the paper, its orientation, the arrangement of the sheet and which elements are on it. The built-in templates cover Letter, Legal, Tabloid, A4, A3, Arch C and Arch D sheets and a square sheet; Custom size, in the Paper list, takes any width and height from 3 to 60 inches. Three arrangements are provided: the map with a side panel, the map with a strip along the bottom, and a full-page map with the elements in boxes over it. Any setting can be changed, and Save as my template keeps the result under a name for the next map. A saved template holds the paper, the arrangement, the elements and the text of the Prepared by and Notes boxes, not the title.

Scale

The Scale list sets the map to a stated scale, from 1:600 to 1:250,000. Zooming the map in Page view changes the scale, and the list then reads As shown with the scale reached. The scale bar is drawn in feet and metres, feet and miles, or metres and kilometres. The scale is true at the centre of the map; the map is in Web Mercator with north up, which is stated on the sheet.

Inset map

Inset map adds a small map in a corner of the frame that shows where the main map sits: the USGS topographic map of an area 5 to 100 times wider, with the extent of the main map outlined. It follows the main map as the main map is moved. In the exported PDF the inset is a second georeferenced frame; software that reads the file takes the larger frame as the map.

Text

Title, Subtitle, Notes and Prepared by are typed in the Page tab and appear on the sheet as they are typed. The legend lists the layers that are shown, by their names in the Layers tab; rename a layer to change its legend entry.

3D view

3D view tilts the map on terrain from USGS 3DEP elevation, at 1 m where lidar has been flown, with the layers draped over it. Drag with the right button, or with Ctrl held, to turn and tilt; the compass at the top right returns to north.

The stem models of every Stem Mapper layer on the map are loaded and stood on the terrain at their mapped positions. A model is accurate within itself. Its position on the ground is the phone's GPS position, which is commonly a few metres off, and its height is set from the terrain, not from the phone. Stem Mapper keeps stem models for accounts with storage. Stem Mapper 3D viewer, in the layer's entry, opens the plot in Stem Mapper's own viewer, where slices are measured.

Save picture saves the view as a PNG image. The page and the exported PDF are flat; the 3D view is not part of them.

Export

Export PDF draws the map frame at the print resolution chosen in the Page tab (150, 200 or 300 dpi) and writes a one-page PDF with the georeferencing of the frame in it. The file opens with its coordinates in the app and in GIS software. The message after an export gives the sheet size, the file size and the pixel size of the map, and says so if a part of the map did not load from the map servers.

On an account with storage, Store on the site for the phone keeps the PDF in the Library, where the app lists it under Maps on the site.

What is stored, and what is free

The map builder is free to use, and a map of public layers is exported without an account. Storing your own data on the site needs a storage plan.

On an account with storage, a file added to the map is stored when it is added (a raster or a PDF of up to 95 MB). On an account without storage, the file is read in the browser and shown on the map, and its entry in the list reads On this computer only. Such a layer is left out of an exported map and of a saved map, and the export message names the layers left out. Store on the site, in the layer's entry, stores it once the account has storage.

Save keeps the map (its layers, their styles, the base map, the page and the view) in the Library, and Open brings it back. A saved map holds references to its layers, so a change to a stored layer shows the next time the map is opened.

Library

The Library lists saved maps, the PDF maps stored for the phone, stored rasters, and stored layers. Each stored layer is exported as a shapefile, GeoJSON, KML, GPX or CSV. A shapefile holds one kind of geometry, so a layer with points, lines and areas is exported as a zip with one shapefile for each. Coordinates are WGS 84 longitude and latitude. Photographs attached to features in the app are counted in the list.

Delete removes a map, a PDF or a layer from the site at once. A layer that a saved map refers to is reported as missing when that map is next opened.